High-performance impregnation for porous mineral surfaces: concrete, plaster, brick, sandstone, clinker,
natural stone, etc. Nano is a hydrophobic and oleophobic impregnation free from solvents with vapor-
permeable properties. Ready for direct use inside and outside buildings. Resistant to weather conditions,
moisture and oily substances, etc. After application to the substrate, it does not change its structure or
Application and use:

The substrate must be dry, free from dust, dirt, oils and grease. Nano is best applied by spraying from
bottom to top to avoid pre-impregnation by flowing impregnation. Impregnation should be even (e.g. in
the case of highly absorbent surfaces, apply twice: wet to wet). The droplets formed on the surface should
be immediately rubbed with a brush or a bench. It is recommended to carry out impregnation works in dry
weather at a temperature of + 5 ° C to 25 ° C. The full effect of impregnation occurs after 48 hours.
Coverage: from 4 m2 / 1 l to 10 m2 / 1 l depending on the type of material and method of application.
More details in the product card
1 l
5 l


There are no reviews yet.

Be the first to review “Murrami Nano Impregnation”

Your email address will not be published. Required fields are marked *

Murrami Nano Impregnation
Ta strona korzysta z plików cookie. Korzystając z tej witryny, wyrażasz zgodę na naszą Politykę cookies.
Polityka prywatności