The primer is based on the highest quality acrylic resins. It strongly binds the surface layers of the
substrate, creating a uniform, hydrophobic (waterproof) coating. For indoor and outdoor use. Designed
for concrete, cement, cellular concrete blocks, plasterboards and gypsum boards. For use under ceramic
tiles, paints, wallpapers, adhesives, leveling and self-leveling floors. It significantly reduces the
absorbency of substrates, improves adhesion, eliminates dusting and excessive abrasion.
Before commencing priming, the dry substrate should be cleaned of dust, dirt, oil, grease, etc. The weakly
bonded parts of the surface should be ripped off and any loose parts removed. Murrami Primer should be
applied to the substrate with a brush, roller or spraying method. Highly absorbent surfaces should be
covered two or three times. To protect plasterboards, the primer should be diluted with water in a ratio of
1: 1. The application of subsequent layers should be carried out at intervals of about 4 hours. The
temperature of the substrate during priming should be between + 5 ° C and 25 ° C. Efficiency: depends on
the absorbency of the substrate and on average ranges from 0.1 l / m2 to 0.5 l / m2. More details in the
product card.
1 l
5 l


There are no reviews yet.

Be the first to review “Universal Primer”

Your email address will not be published. Required fields are marked *

Universal Primer
Ta strona korzysta z plików cookie. Korzystając z tej witryny, wyrażasz zgodę na naszą Politykę cookies.
Polityka prywatności